Loba Invisible Protect AT Water-Based Surface Protection - 1 Gallon

About Loba 2K Invisible Protect Water-Based Hardwood Floor Finish

The Loba 2K Invisible Water-Based Finish is a premium two-component polyurethane designed to protect hardwood floors while preserving the natural appearance and feel of unfinished wood. Unlike traditional finishes that add gloss or amber tones, Loba 2K Invisible creates an ultra-matte, low-sheen surface that showcases the true beauty of the wood without looking like it has been coated.

Ideal for residential homes, commercial spaces, and high-traffic environments, this water-based finish offers exceptional abrasion resistance, chemical resistance, and long-term durability. Its self-sealing formula eliminates the need for a separate sealer on many applications, helping contractors save time while achieving a clean, modern look.

Loba Invisible Protect Special Feature

Loba 2K InvisibleProtect A.T. is a unique surface treatment. In addition to being invisible, it also feels incredibly like untreated wood. The latest generation of raw materials guarantees that the floor will be long-lasting and will not be polished up even under heavy wear.

Recommended use:

Suitable for wood floors. For heavy traffic residential areas and commercial use. Meets the OSHA requirements for walking surfaces of 0.5 (ASTM D2047-04).

Properties:

• Looks and feels like natural untreated wood.
• Very easy to apply.
• Self sealing - no primer needed
• Excellent chemical resistance
• Non ambering, keeps the natural appearance of the wood
• Creates the look of natural oil with the prior use of HS 2K Intensive

Coverage:

LOBA Deluxe 120 Roller: apply at 325-375 square feet per gallon per coat.

LOBA Micro 120 Roller: apply at 400-500 square feet per gallon per coat.

Application:

LOBA Deluxe 120 Roller - as a two coat system.

LOBA Micro 120 Roller - as a three coat system only.

• Sand and remove dust from the surface properly
• First coat 2K InvisibleProtect A.T. with Loba roller Deluxe 120 or Micro 120
• Intermediate sanding after 4-6 hours with 180 grit yellow perforated pad or maroon pad to remove grain raise
• Second coat 2K InvisibleProtect A.T with Loba roller Deluxe 120 or Micro 120
• Apply an optional third coat of 2K InvisibleProtect A.T. if using the Micro 120 roller

Spec Sheets

• Loba 2K Invisible Protect Sell Sheet
• Loba 2K Invisible Protect Technical Data Sheet
• Loba 2K Invisible Protect Safety Data Sheet